Saturday, November 15, 2008

caterham


















Caterham Cars is a manufacturer of specialist lightweight sports cars based in CaterhamSurreyEngland and part of the British motor industry. Their only current model, the Caterham 7 (or Seven), is a direct evolution of the Series 3 Lotus Seven designed by Colin Chapmanand originally launched in 1968.

On 5th Nov 2008 Caterham announced a partnership with Project Splitwheel (www.splitwheel.com), an online initiative that will usecrowdsourcing methods to design a new Caterham performance car with the input of owners and car enthusiasts. The model could potentially enter production by 2011.[1]

Caterham Cars Ltd
TypeBritish Sportscar Manufacturer
Founded1973
FounderGraham Nearn
HeadquartersFlag of the United Kingdom Kennet Road, Dartford, KentEnglandUK
IndustryAutomobiles
ProductsCaterham CSR, Classic, Roadsport, SV, Superlight -see Model line-up
Websitewww.caterham.co.uk

















History

1957-2007 Seven 50th Anniversary logo

[edit]Lotus Origins

Colin Chapman's Lotus Cars launched the Series 1 Lotus Seven in 1957. The car was immediately embraced by enthusiasts as a low-cost, lightweight sports car and successful race car. Revised Series 2, Series 3 and Series 4 versions were subsequently launched in 1960, 1968 and 1970 respectively.

Caterham Cars had been a major Lotus 7 dealer during the 1960s, and its founder, Graham Nearn, purchased the rights to continue manufacture of the Seven design from Chapman in 1973, after Lotus announced their intention to discontinue the model. Caterham initially restarted manufacture of the Lotus Seven Series 4; however, when this proved unpopular, production switched to a Series 3 model in 1974.

The Lotus/Caterham 7 is widely regarded by car enthusiasts and the media as one of the iconic sports cars of the 20th century. With 2007 marking the 50th year of continuous production, the Seven miraculously still leads the market in track performance and driving enjoyment.

[edit]Construction

As with their Lotus Seven precursors, Caterhams are constructed of aluminium sheet attached to a tubular steel chassis. Nosecone and wings are either GRP or carbon fibre depending on specification. All Sevens are front engined with rear wheel drive and two seats. Their extremely high performance is achieved through light weight (less than 500 kg (1,102 lb) on some versions) rather than particularly powerful engines. As well as a lightweight chassis and bodywork, Caterham Sevens achieve their very low mass through their lack of comfort and safety oriented features such as a fixed roof, doors, radio, air-conditioning, airbags, traction/stability control, ABS, sat nav or cruise control. As a result, the Seven is somewhat limited in its practicality for everyday usage and is instead recognised by driving enthuisasts for its extreme focus on driving enjoyment, making it an ideal track/race car or 'Sunday' car.

[edit]Kit format

Chapman and Lotus helped to pioneer the British kit car industry. The Lotus Seven was offered in kit form to allow buyers to avoid new car tax in the UK. Subsequently Caterham continued offering cars in 'complete knock down' (CKD) kit form as the tradition of hand building your own Seven was well established amongst enthusiasts. Today, all Caterham Sevens are still offered in kit form in the UK except the CSR (Series 6) model. Modern Caterham kits differ from the majority of kit car as all parts are supplied ready to assemble, not requiring a donor car, fabrication or any special skills.

[edit]International

Although the Seven has always been popular with enthusiasts outside of the UK marketplace, export of the Seven to other markets has increasingly been limited by homologation, safety and emissions regulations in the modern era. As a result, the chassis/engine combinations, specifications, pricing and kit-form availability vary widely between countries.

In the United States Caterhams are currently sold as kits only, lacking some modern safety features required of manufacturers, but which are not required for individually-assembled vehicles. Buyers can either choose to construct the cars themselves or pay their regional dealers or local builders to assemble them. Typically the engine and transmission are sourced separately as a unit- often from Caterham- but all other components (including frame, suspension, differential, driveshaft, interior, wiring and instruments) are provided in kit form. In the UK, the vehicles can be obtained as kits or entirely assembled by Caterham and registered for the road under SVA (Single Vehicle Approval) regulations. In the '60s, the original Lotus Seven was sold only in kit form in both the UK and the US, in order to evade the very high taxes on complete new cars that were not assessed on automobile parts.

[edit]Location

Until 1987 the offices, factory and showroom of Caterham Cars were located in the town of Caterham, Surrey, UK. In 1987, the production and administration of the company moved to a new factory in Dartford, Kent, UK. Caterham Cars still retains a showroom and servicing facility in the town of Caterham adjacent to the train station. Additionally 'Caterham Midlands' showroom operates outside of Leicester.

[edit]Caterham 21

In the 1994 Caterham also produced a model called the '21'. Mechanically the 21 was very similar to the 7, using a modified 7 spaceframe chassis with a new GRP roadster-style body, including a wrap-around windscreen and fold-away fabric hood (convertible top). Whilst given excellent reviews by the UK automotive press, the 21 never sold particularly well due to competition from the more sophisticated Lotus Elise, with which it shared the same K-Series engine line-up and similar pricing. The 21 was discontinued in 1999.

[edit]2008 Model Line-up

Classic Caterham

Chassis Variants

In 2008 Caterham offers three different chassis variants in the UK.

  • Series 3 (S3)

The most popular variant retains the same dimensions and layout of the Lotus 7 Series 3.

  • Series 5 (SV)

Caterham introduced this variant in 2000 to accommodate larger drivers (space is restricted in the S3 for drivers over 6 ft (1.8 m) tall.) Although visually very similar to the S3, the SV is longer taller and wider and has significantly more space for taller and broader drivers with the added benefits of more luggage space, a larger fuel tank and more stability. The SV chassis is 25 kg (55 lb) heavier than the S3.

  • CSR (Series 6)

The CSR was launched in 2005 following extensive research and development by Caterham with the objective of creating an improved Seven. The CSR is based on the larger dimensions of the SV but with a substantially revised and stiffer chassis, inboard 'pushrod' front suspensions, fully independent rear suspension, improved aerodynamics, potent Cosworth engines and a new 'integrated' dashboard layout.

Model/trim variants

- Classic - The most basic version of the 7 was traditionally offered with a 'live' rear axle but now comes with De Dion rear suspension as per the other models in the range. This trim level strips away all non-essential equipment and comforts.

  • Classic trim is available on S3/SV chassis
  • Engines: 1.4-litre K-Series (105 bhp).

- Roadsport - Roadsport is the trim level intended for general usage, different weather conditions and touring. The spec includes a full windscreen and weather equipment to increase practicality. A large range of performance options are available.

  • Classic trim is available on S3/SV chassis
  • Engines: 1.6-litre Ford Sigma (125 or 150 bhp).
Caterham R300 Superlight

- Superlight - The Superlight is intended for track and fast road usage. Superlight spec includes performance options such as carbon bodywork and a close ratio 6-speed gearbox. A wind deflector in place of the windscreen makes a helmet more or less mandatory. The Superlight R400 uses a 2.0 litre Ford Duratec engine tuned to 210 bhp (157 kW/213 PS). The R400 name indicates the car's 400 bhp-per-tonne power-to-weight ratio. R300 and R500 models are scheduled for launch in 2008.

  • Superlight trim is available on S3/SV chassis
  • Engines: 1.6-litre Ford Sigma (150 bhp) or 2.0-litre Ford Duratec (210 bhp)

- CSR -

Main article: Caterham CSR

The CSR chassis comes in two basic trims which mirror those of the S3/SV cars. The 'basic' CSR has a road and touring oriented spec with full windscreen and weather equipment. This is available as the CSR200 (200 bhp) or CSR260 (260 bhp). The CSR Superlight (also 260 bhp) is the current Caterham performance flagship strips away the windscreen, integrated dash and other comfort-oriented components for maximum performance, with specialist 'Dynamic dampers' added to improve its already phenomenal grip. The 'basic' CSR set an unofficial time of 1.17.4 on the BBC Top Gear test track at Dunsfold, placing it ahead of most of the world's most expensive performance cars.

  • Engines: 2.3-litre Ford Duratec tuned by Cosworth (200 bhp or 260bhp)

- Future models - Caterham will introduce Superlight R300 and R500 models in 2008-2009 to compliment the existing R400. To celebrate the 50th anniversary of the Seven 2007 Caterham showed a concept car known as the X330 which utilised the CSR chassis but with a supercharged 330 bhp (246 kW/335 PS) duratec engine. Production is unconfirmed. The 'Caterham Levante', announced in associate with RS Performance, is a mostly-carbon-fibre bodied Caterham, with Kevlar seats, which when combined with a 550bhp 2.4litre supercharged V8 and a reduced body weight of just 530kg boasts more than 1,000bhp per tonne. The car should cost around £115,000, and only eight will be produced to celebrate more than 50 years in production.[2]

Kit build All of the 2008 model line-up is available as a 'CKD' complete kit for build by the owner, with the exception of CSR models.

[edit]Engines

Historically, engines have been supplied by Ford, specifically Ford Kent engines or Cosworth-derived race-prepared BDA/R units, enlarged to 1.7 litres and generating 150–170 bhp. In the early '90s, Caterham started using powerplants from other sources, with the least expensive models using 1.4-litre K series engines from MG Rover for the base model, and Vauxhallengines including full race versions of the 16 valve 2.0XE "red top" as fitted to 1990 Vauxhall Works Touring Cars. Rover engines span a power outout of 110–250 bhp in the R500 Evolution, Vauxhall engines 165 bhp (123 kW/167 PS) to 320 bhp (239 kW/324 PS) in some factory built versions of the car. A 250 bhp (186 kW/253 PS) Caterham JPE (Jonathan Palmer Evolution) briefly held the world record for production car 0–60 mph times (at 3.4 seconds) until it was bettered by the $1M McLaren F1.

The many aftermarket tuning companies for these cars have also offered the Ford Zetec, Honda Fireblade, Suzuki Hayabusa and even the Mazda Rotary engine. It is rumoured one owner even fitted a rotary diesel engine from a military drone.

In 2001, Caterham designated MG Rover the sole engine supplier for factory-built Sevens, with Ford Zetec, Honda Fireblade, Yamaha Firebird and Suzuki Hayabusa engines still available for kit assembly. The Rover engines were based on the K series and carried the 'Xpower' branding. However, the partnership evidently came to an end with the introduction of the 2005 model, powered by a Ford Duratec engine.

Typical powerplant output ranges from 140 to over 300 bhp (224 kW/304 PS), depending on specs and modifications.

The gearbox is either the classic Ford T9 five-speed or Caterham's own six-speed box. The T9 is cheap and durable, but has gear ratios meant for a much heavier car. The six-speed gearbox is expensive and had early 'toothing' problems, but its ratios are considered the perfect match for the Seven. Independent companies such as Quaife do offer replacement gearkits for the T9 as well as sequential boxes for those with a racing fever and the need for a more robust transmission.

The most extreme engine/chassis combination available from the factory as of 2004 was the R500 with the 230 bhp (169 kW) MG Rover engine, bringing the car's 430 kg (948 lb) from zero to 60 mph (97 km/h) in 3.4 seconds. This model also held a production car world record for 0-100-0 mph at 10.73 seconds set in 27 April 2004.

[edit]Motor racing

Because of its relatively high power-to-weight ratio and its exceptional, Lotus-heritage handling, the Caterham has been a favourite among club racers since the beginning of its career. In the United Kingdom and elsewhere, the Caterham is used in a variety of one-make series and sports car championships, both regional and national.

However, the Caterham has proven so successful against bigger and more powerful sports cars that it has been banned from FIA competitions and most international races, coining the phrase "too fast to race".[3] This was further extended to the Caterham Seven's (as Caterham Fireblade) appearance in Gran Turismo 4 that the Fireblade was banned from almost any race in the game (though it was really due to rendering issues).




caparo












The Caparo T1 is a British mid-engine, rear-wheel drive, two-seat automobile built by Caparo Vehicle Technologies, founded by design director Ben Scott-Geddes and engineering director Graham Halstead, former engineers involved in the development of the McLaren F1.[1]The T1 was inspired by Formula One design, and intended as a relatively affordable street legal race car.[2] The T1 was scheduled for production in mid-2007 for a price of GB£235,000 (approx. US$480,000 or 328,000, c.2007),[3] with approximately 25 cars per year built




Caparo T1
An orange Caparo T1 at the 2006 British Motor Show
ManufacturerCaparo Vehicle Technologies
Also calledFreestream T1 (formerly)
ClassSports car
Body style(s)2-door coupé
LayoutMid-engine, rear-wheel drive
Engine(s)3,496 cm³ (3.5 L) naturally-aspirated V8
Transmission(s)6-speed sequential
Wheelbase2,900 mm (110 in)
Length4,066 mm (160.1 in)
Width1,990 mm (78 in)
Height1,076 mm (42.4 in)
Kerb weight550 kg (1,200 lb)
Fuel capacity55 litres (15 U.S. gal)
Designer


Overview

The T1 has a dry weight of 550 kilograms (1,200 lb), an overall length of 4,066 millimetres (160.1 in), an overall width of 1,990 millimetres (78 in), an overall height of 1,076 millimetres (42.4 in), and a wheelbase of 2,900 millimetres (110 in). It has a fuel tank capacity of 55 litres (15 U.S. gal).

[edit]Exterior

The exterior of the T1 closely resembles that of a racing prototype or Formula One racing car. It features a carbon fibre aerodynamic lowdrag body design, composed of individual sections, with an adjustable twin element front wing, single element rear wing, and fowler flaps, and a ground effect diffuser, allowing it to create 875 kilograms (1,930 lb) of downforce at 240 kilometres per hour (150 mph).[5] The wings are replaceable with road and track variations.

[edit]Interior

The interior of the T1 is a two-seat configuration, lacking any amenities and luxuries to reduce excess weight. The passenger's seat is set back from the driver's seat slightly, allowing the seats to be placed closer together, thereby reducing the overall width of the T1.[6] Offered are a head protection system, six-point harnesses for the driver and passenger, compatible with a HANS device, and is designed with a central safety cell made of a high-strength steel roll hoop with a fire system. The dashboard is multi-function with race data logging and speed sensors for traction control and launch control.

[edit]Chassis

The Caparo T1's tailpipes andlouvers along the F1-style body.

The chassis of the T1 is composed of a carbon fibre and aluminium honeycomb monocoque with a front composite crash structure and a rear tubularspace frame construction. The suspension is of a double wishbone design with tunable anti-roll bars, front and rear, and five-way adjustable racedampers. The braking system is composed of 355-millimetre (14.0 in) steel brake discs, with six-piston and four-piston callipers front and rear, respectively. The brake bias pedal box is fully adjustable and brake pads are available in various compounds. The wheels are all-aluminium 10-by-18-inch (250 mm × 460 mm) and 11-by-19-inch (280 mm × 480 mm) front and rear, respectively, with Pirelli P Zero Corsa tyres. Magnesium 10-by-18-inch (250 mm × 460 mm) and 11-by-18-inch (280 mm × 460 mm) wheels front and rear, respectively, with Pirelli slick and wet track tyres are available as optional equipment.

[edit]Powertrain

The T1 sports a 116-kilogram (260 lb),[7] 32-valve, 3,496-cubic centimetre (3.5 L), all-aluminium, naturally-aspiratedMenard V8 engine with cylinder banks mounted at 90° and lubricated via a dry sump oil system. The design of the engine has gone through several designs, previously including a smaller 2.4-litre supercharged unit. The production design generates a maximum power of 575 horsepower (429 kW/583 PS) at 10,500 revolutions per minute and a maximum torque of 310 pound-feet (420 N·m) at 9,000 revolutions per minute,[5][8] giving the car a power-to-weight ratio of 1,045 horsepower per tonne (779.3 kW/t). In addition, the engine has been reported to successfully reach 700 horsepower (520 kW/710 PS) of power on methanol fuel.[9] The engine is controlled via a fully tunable Pectel SQ6 engine control unit and the throttle is controlled via a throttle-by-wiresystem.[7]

The T1's gearbox is a 6-speed sequential made of a magnesium and carbon construction that has a variety of available gear ratios and utilizes a pneumatic actuator to shift, able to upshift in 60 milliseconds and downshift in 30 milliseconds.[10] Furthermore, the drivetrain incorporates a limited slip differential and equal length hollow tripod driveshafts.

[edit]Performance

The T1 is reported to be capable of exceeding an estimated maximum speed of 205 miles per hour (330 km/h) on a low downforce setup.[11] From a standing start, it has an estimated 0–100 kilometres per hour (0–62 mph) under 2.5 seconds and onto 160 kilometres per hour (99 mph) under 5 seconds, depending on tyre setup.[11] It is also capable of an estimated lateral acceleration of up to 3 g and braking deceleration of 3 g, depending on tyre setup. Furthermore, it is capable of 39-mile-per-imperial-gallon (14 km/Lfuel economy.[12]

[edit]History

[edit]Unveiling

A Caparo T1 at the 2008Goodwood Festival of Speed.

The T1 was officially unveiled by His Serene Highness The Sovereign Prince of Monaco, joined by Murray Walker, at the Top Marques auto show in Monaco on April 202006.[13] The show car unveiled was a prototype, painted orange as historic McLaren cars were due to the nature of the T1's designers being ex-McLaren engineers. Another test vehicle was reported to have been under construction at the time.

During the MPH '07 auto show, on October 30 through November 2 and later November 13 through November 162007, Caparo, in conjunction with theLondon Metropolitan Police, unveiled a prototype police vehicle variant of the T1 named the Rapid Response Vehicle (RRV).[14][15] However, Top Gearand Edmunds reported that the car would not be put into production.[15][16]

[edit]Incidents

Jason Plato was injured in a prototype T1 in October 2007 at the Bruntingthorpe proving ground when it caught fire at an estimated 250 kilometres per hour (160 mph).[17] The T1 was being tested during filming for Five's Fifth Gear. Plato described what happened as:

There was a slight loss of power, I looked in the mirror and saw some smoke, there was a slight smell of oil and then suddenly there was this intense heat. The car spontaneously erupted into a ball of flame and I was sat in the middle of a fireball. I hit the brakes, brought the car to a stop as quickly as I could and jumped out.[18]

In the associated episode of Fifth Gear, first broadcast October 152007, presenter Vicki Butler-Henderson suggested the fire was caused by a "faulty oil sealing component," which now identified, will be fully rectified by Caparo.[19]

While being tested for competing British television programme Top Gear, first broadcast on November 112007, a floor panel came loose from the test vehicle as it was being driven at speed by Jeremy Clarkson, after he had already made a play of being scared about driving the car because of Plato's experience. Afterwards, there was a problem with the car's petrol injection system. In the same review, Clarkson mentioned two more incidents, one at the press launch, when "some aspect of the front suspension came adrift" while a Dutch journalist was driving, causing him to veer off road, and one at the Goodwood Festival of Speed when the throttle stuck open.[3]

[edit]Reviews

On November 112007, the T1 surpassed the Top Gear Power Board leader's time of 1:17.6, held by the Koenigsegg CCX, with a time of 1:10.6, the largest margin any car has ever beaten the previous best by. Though immediately having declared the time and placed it on the Power Board, presenter Jeremy Clarkson removed the record because it did not meet the show's rule that the car must be able to go over a speed bump, despite it being street legal.[3] However, Ben Scott-Geddes of Caparo has stated that, "the model we supplied to Top Gearwas one of our final engineering vehicles without adjustable ride height and electronic active driver control systems which are standard on our production models. When drivers select the 'road' setting, the car is more tractable in slower speed conditions and the ride height is fully adjustable to bring the car up to 90 mm clearance, making it more than capable of driving over speed bumps."[20]

Ben Scott-Geddes