faiz blogging: dodge challenger

dge Challenger is the name of three different automobile models marketed by the Dodge division of Chrysler LLC since 1970.

Dodge Challenger
1970 Dodge Challenger R/T coupe
Manufacturer	Dodge
Parent company	Chrysler Corporation (1970-74) Mitsubishi Motors (1978-1983) Chrysler LLC (2008-present)
Production	1970-1974 1978-1983 2008-present
Successor	Dodge Conquest (for 1984) Dodge Daytona (for 1984)
Class	Pony car (1970-74, 2008-present)
Layout	FR layout

First generation (1970-1974)

First generation

Production	1970-1974
Assembly	Hamtramck, Michigan Los Angeles, California
Class	Pony car
Body style(s)	2-door convertible 2-door hardtop coupe
Platform	E-body
Engine(s)	198 CID Slant 6 225 CID Slant 6 I6 318 CID LA V8 340 CID LA V8 360 CID LA V8 383 CID B V8 426 CID Hemi V8 440 CID RB V8
Transmission(s)	4-speed manual 3-speed TorqueFlite automatic
Wheelbase	110.0 in (2794 mm)
Length	191.3 in (4859 mm)
Width	76.1 in (1933 mm)
Height	50.9 in (1293 mm)
Related	Plymouth Barracuda
Designer	Carl Cameron

The Challenger is described in a book about 1960s American cars as Dodge’s "answer to the Mustang and Camaro."^[1] It was one of two Chrysler E-body cars, the other being the slightly smaller Plymouth Barracuda. Although developed differently by Plymouth and Dodge stylists working from the same basic body shell,^[2]^{[not in citation given]} both versions were intended "to compete against cars like the Chevrolet Camaro and Ford Mustang, and to do it while offering virtually every engine in Chrysler's inventory."^[3] However they were "a rather late response to the ponycar wave the Ford Mustang had started."^[4] The author of a book about "Hemi"-powered muscle cars says that the Challenger was conceived in the late 1960s as Dodge’s equivalent of the Plymouth Barracuda, and that the Barracuda was designed to compete against the Mustang and Camaro. He adds that Chrysler intended the new Dodge as "the most potent ponycar ever," and positioned it "to compete against the Mercury Cougar and Pontiac Firebird." ^[5]

The Challenger's longer wheelbase, larger dimensions and more luxurious interior were prompted by the launch of the 1967 Mercury Cougar, likewise a bigger, more luxurious and more expensive pony car aimed at affluent young American buyers.^[6] The wheelbase, at 110 inches (2,794 mm), was two inches longer than the Barracuda, and the Dodge differed substantially from the Plymouth in its outer sheetmetal, much as the Cougar differed from the shorter-wheelbase Ford Mustang.

Exterior design was done by Carl Cameron, who also did the exterior for the 1966 Dodge Charger. Cameron based the 1970 Challenger grille off an older sketch of his 1966 Charger prototype that was to have a turbine engine. The Charger never got the turbine, but the Challenger got that car's grille. Although the Challenger was well-received by the public (with 76,935 produced for the 1970 model year), it was criticized by the press, and the pony car segment was already declining by the time the Challenger arrived. Sales fell dramatically after 1970, and Challenger production ceased midway through the 1974 model year. About 165,500 Challengers were sold over this model's lifespan.

Four models were offered: Challenger Six, Challenger V8, T/A Challenger, and Challenger R/T. Challengers could either be hardtops, coupes, or convertibles (through 1971 only). The standard engine on the base model was the 225 CID (3.7 L) six-cylinder. Standard engine on the V8 was the 230 horsepower (170 kW) 318 CID (5.2 L) V8 with a 2-barrel carburetor. Optional engines were the 340 CID (5.6 L) and 383 CID (6.3 L) V8s, all with a standard 3-speed manual transmission, except for the 290 horsepower (220 kW) 383 CID engine, which was available only with the TorqueFlite automatic transmission. A 4-speed manual was optional on all engines except the 225 CID I6 and the 383 CID V8.

The performance model was the R/T (Road/Track), with a 383 CID Magnum V8, rated at 335 horsepower (250 kW). Standard transmission was a 3-speed manual. Optional R/T engines were the 375 horsepower (280 kW) 440 CID Magnum, the 390 horsepower (290 kW) 440 CID (7.2 L) Six-Pack and the 425 horsepower (317 kW) 426 CID (7 L) Hemi. The R/T was available in all three body styles; both standard and R/T hardtops could be ordered as the more luxurious SE specification, which included leather seats, a vinyl roof, a smaller 'formal' rear window, and an overhead interior console that contained three warning lights (door ajar, low fuel, and seatbelts). The Challenger R/T came with a Rallye instrument cluster which included a 150 mph (240 km/h) speedometer, an 8,000 rpm tachometer, and an oil pressure gauge. The convertible Challenger was available with any engine, as well as in the R/T and SE trim levels. In 1973, Dodge dropped the R/T badging and now called it the "Rallye", although it was never badged as such. The shaker hood scoop was not an option for 1972.

A 1970-only model was the Dodge Challenger T/A (Trans Am) racing homologation car. In order to race in the Sports Car Club of America's Trans American Sedan Championship, it built a street version of its race car (just like Plymouth with its Plymouth 'Cuda AAR) which it called the Dodge Challenger T/A (Trans Am). Although the race cars ran a destroked version of the 340, street versions took the 340 and added a trio of two-barrel carburetors atop an Edelbrock aluminum intake manifold, creating the 340 Six Pack. Dodge rated the 340 Six Pack at 290 brake horsepower (220 kW), only 15bhp more than the original 340 engine (and mysteriously the same rating as the Camaro Z/28 and Ford Boss 302 Mustang), it actually made about 320 brake horsepower (240 kW). It breathed air through a suitcase sized air scoop molded into the pinned down, hinged matte-black fiberglass hood. Low-restriction dual exhausts ran to the stock muffler location under the trunk, then reversed direction to exit in chrome tipped "megaphone" outlets in front of the rear wheels. Options included a TorqueFlite automatic or pistol-grip Hurst-shifted four-speed transmission, 3.55:1 or 3.90:1 gears, as well as manual or power steering. Front disc brakes were standard. The special Rallye suspension used heavy duty parts and increased the camber of the rear springs. The T/A was among the first production vehicles to use different size tires front and rear: E60x15 fronts, and G60x15 in back. The modified camber elevated the tail enough to clear the rear rubber and its side exhaust outlets, thick side stripes, bold ID graphics, a fiberglass ducktail rear spoiler, as well as a fiberglass front spoiler added to the image. The interior was strictly stock Challenger. Unfortunately, the race Challenger T/A was not competitive and the street version suffered from severe understeer in fast corners. It could turn mid 14s in the quarter mile, which would do any small block muscle car proud. The T/A would only be available for 1970 as Dodge pulled out of Trans Am racing. Only 2,142 T/As were made. A 1971 model using the 340 engine with a 4-barrel carburetor was planned and appeared in period advertising, but was not produced.

The "Western Special" was a version available only to west coast dealers. It came with a rear-exit exhaust system and Western Special identification on the rear decklid. Some examples came with a vacuum-operated trunk release. Another late production version was the low-priced "Deputy", stripped of some of the base car's trim and with fixed rear side glass.

By 1972, all the big-block engines were gone, maximum power was downgraded to 240 horsepower (180 kW) to reflect the more accurate Society of Automotive Engineers (SAE) net hp calculations. Production of Challengers ceased in mid-1974.

For obvious reasons, the 440 and the 426 Hemi engines were considered the most desirable, and nowadays command sizable premiums over the smaller engines (with the exception of the limited edition Challenger T/A with its 340 six-pack).

1974 Dodge Challenger coupe

Dodge Challenger coupe

1972 Dodge Challenger coupe

1971 Dodge Challenger convertible

[edit] Cosmetic variations

Although the body style remained the same throughout the Challenger's five year run, there were two notable changes to the front grille. 1971 models had a more stylized "split" grille, while 1972 introduced the "sad-mouth" design. With this change to the front end, 1972 through 1974 models had little to no variation. The only way to properly distinguish them is that the 1972s had flush mounted bumpers with no bumper guards, (small bumper guards were optional), while both the 1973 and 1974 models had the protruding "5 mph (8.0 km/h)" bumpers (with a rubber type filler behind them) in conjunction with large bumper guards. These changes were made to meet US regulations regarding crash test safety.

The 1970 taillights went all the way across the back of the car, with the backup light in the middle of the rear. In 1971, the backup lights were on the left and right instead of the middle. The taillight array also changed for 1972 onwards, with the Challenger now having four individual rectangular lamps.

[edit] Collector's value

Original "numbers matching" high-performance 1970-71 Challengers are now among the most sought-after collector cars.^{[citation needed]} The rarity of specific models with big engines is the result of low buyer interest and sales with the correspondingly low production when new.

The 1970 and 1971 models tend to generate more attention as performance and style options were still available to the public. However, with the popularity of these vehicles increasing, and the number of usable and restorable Challengers falling, many collectors now search for later models. Many "clones" of the 1970 and 1971 Challengers with high-performance drivetrains have been created by using low-end 6 cylinder and 318 powered non-R/T or T/A cars and installing one of the "Magnum" performance engine combinations (340, 383, 440 or 426 Hemi) and adding the specific badging and hoods.

[edit] Export markets

Dodge Challengers were mainly produced for the US and Canadian markets. Interestingly, Chrysler officially sold Challengers to Switzerland through AMAG Automobil- und Motoren AG in Schinznach-Bad, near Zurich. Only a few cars were shipped overseas each year to AMAG. They did the final assembly of the Challengers and converted them to Swiss specs. There are few AMAG cars still in existence. From a collector's point of view, these cars are very desirable. Today, less than five Swiss Challengers are known to exist in North America.^[7]

Chrysler exported Dodge Challengers officially to France as well through their Chrysler France Simca operation, since Ford sold the Mustang in France successfully in small numbers. However, only a few Challengers were exported and Chrysler finally gave up the idea of selling them in France. A few French Challengers still exist today.

[edit] Production

[edit] Engines

Engine choices included the following:

C-225 CID (3.7 L) Slant 6 I6:

(145 bhp)1970-1972

G-318 CID (5.2 L) LA V8:

(230 bhp) 1970-1974

H-340 CID (5.6 L) LA V8:

(275 bhp) 1970-1973

J-340 CID (5.6 L) LA V8 Six-Pack

(290 bhp) 1970 *T/A

J-360 CID (5.9 L) LA V8:

(245 bhp) 1974

L-383 CID (6.3 L) B V8:

(290 bhp and 330 bhp) 1970-1971

N-383 CID (6.3 L) B V8:

(335 bhp) 1970-1971

U-440 CID (7.2 L) RB V8:

Available in Magnum 4-barrel carbureted form (375 bhp) 1970-1971

V-440 CID (7.2 L) RB V8 Six-Pack

(3 × 2-barrel carburetors and 390 bhp/490 ft·lbf (660 N·m) 1970-1971

R-426 CID (7.0 L) Hemi V8:

(425 bhp) (317 kW)/ 490 ft·lbf (660 N·m), costing an extra US$1,228, and very few sold. 1970-1971

[edit] Performance 1/4 mile

340:14.8 @ 96 mph (154 km/h)
340T/A: 13.99 @ 97 mph (156 km/h)
383 2-barrel: 15.1 @ 96 mph (154 km/h)
383 Magnum R/T: 14.3 @ 99 mph (159 km/h)
440 Magnum R/T: 13.8 @ 102 mph (164 km/h)
440 Six-Pack: 13.4 @ 107 mph (172 km/h)
426 Hemi: 13.0 @ 108 mph (174 km/h)

[edit] Serial numbers

ex. JS27R0B100001

J - Car line, Dodge Challenger
S - Price class (H-High, S-Special)
27 - Body type (23-Hardtop, 27-Convertible, 29-Sports hardtop)
R - Engine code (see engines above)
0 - Last digit of model year
B - Assembly plant code (B-Hamtramck E-Los Angeles)
100001 - Consecutive sequence number

[edit] Production numbers

1970 = 76,935 *includes 2,539 T/As
- Hardtop I6: 9,929
- Hardtop V8:. 39,350*
- Sports hardtop I6: 350
- Sports hardtop V8: 5,873
- Convertible I6: 378
- Convertible V8: 2,543
- Hardtop R/T: 13,796
- Special Edition hardtop R/T: 3,753
- Convertible R/T: 963

1971 = 26,299
- Hardtop I6: 1,672
- Hardtop V8: 18,956
- Convertible I6: 83
- Convertible V8: 1,774
- Hardtop V8 R/T: 3,814

1972 = 22,919
- Hardtop I6: 842
- Hardtop V8: 15,175
- Hardtop V8 Rallye: 8,123

1973 = 27,930
- Note: All models were V8-powered hardtops

1974 = 11,354
- Note: All models were V8-powered hardtops

[edit] Colors

1970

Light Gold Metallic-FY4, Plum Crazy (purple)-FC7, Sublime (green)-FJ5, Go-Mango(orange)-EK2, Hemi Orange-EV2, Banana (yellow)-FY1, Light Blue Metallic-EB3, Bright Blue Metallic-EB5, Dark Blue Metallic-EB7, Rallye Red-FE5, Light Green Metallic-FF4, Dark Green Metallic-EF8, Dark Burnt Orange-FK5, Beige-BL1, Dark Tan Metallic-FT6, White-EW1, Black-TX9, Cream-DY3, Panther Pink-FM3

1971

Light Gunmetal Metallic-GA4, Light Blue Metallic-GB2, Bright Blue Metallic-GB5, Dark Blue Metallic-GB7, Dark Green Metallic-GF7, Light Green Metallic-GF3, Gold Metallic-GY8, Dark Gold Metallic-GY9, Dark Bronze Metallic-GK6, Tan Metallic-GT5, Bright Red-FE5, Bright White-GW3, Black-TX9, Butterscotch-EL5, Citron Yella-GY3, Hemi Orange-EV2, Green Go-FJ6, Plum Crazy-FC7, Top Banana-FY1

1972

Light Blue-HB1, Bright Blue Metallic-HB5, Bright Red-FE5, Light Green Metallic-GF3, Dark Green Metallic-GF7, Eggshell White-GW1, Black-TX9, Light Gold-GY5, Gold Metallic-GY8, Dark Gold Metallic-GY9, Dark Tan Metallic-GT8, Light Gunmetal Metallic-GA4, Medium Tan Metallic-GA4, Super Blue-GB3, Hemi Orange-EV2, Top Banana-FY1

1973

Black-TX9, Dark Silver Metallic-JA5, Eggshell White-EW1, Parchment-HL4, Light Gold-JY3, Dark Gold Metallic-JY9, Gold Metallic-JY6, Bronze Metallic-GK6, Pale Green-JF1, Dark Green Metallic-JF8, Light Blue-HB1, Super Blue-TB3, Bright Blue Metallic-GB5, Bright Red-FE5, Top Banana-FY1, Light Green Metallic-GF3

1974

Yellow Blaze-KY5, Golden Fawn-KY4, Parchment-HL4, Bright Red-FE5, Deep Sherwood Metallic (Green)-KG8, Eggshell White-EW1, Black-TX9, Light Blue-HB1

[edit] Second generation (1978-1983)

Second generation

Production	1978-1983
Assembly	Okazaki, Aichi, Japan
Body style(s)	2-door coupe
Engine(s)	1.6 L 4G32 I4 2.6 L 4G54 I4
Transmission(s)	5-speed manual 3-speed automatic
Wheelbase	2530 mm (99.6 in)
Length	4525 mm (178.1 in)
Width	1675 mm (65.9 in)
Height	1345 mm (53 in)–1355 mm (53.3 in)
Related	Mitsubishi Galant Lambda Plymouth Sapporo

See Mitsubishi Galant Lambda for more information

The Challenger name was revived in 1978 for a version of the early Mitsubishi Galant Lambda coupe, known overseas as the Mitsubishi Sapporo and sold through Dodge dealers as a captive import, identical except in color and minor trim to the Plymouth Sapporo. Although mechanically identical, the Dodge version emphasized sportiness, with bright colors and tape stripes, and the Plymouth on luxury with more subdued trim. Both cars were sold until 1983 , until being replaced by the Conquest and Daytona.

The car retained the frameless hardtop styling of the old Challenger, but had only a four-cylinder engine and was a long way in performance from its namesake. Nevertheless, it acquired a reputation as a reasonably brisk performer of its type, not least because of its available 2.6 L engine, exceptionally large for a four-cylinder. Four-cylinder engines of this size had not usually been built due to inherent vibration, but Mitsubishi pioneered the use of balance shafts to help damp this out, and the Challenger was one of the first vehicles to bring this technology to the American market; it has since been licensed to many other manufacturers.

[edit] Third generation (2008-present)

Third generation

Production	2008-present
Assembly	Brampton, Ontario, Canada
Class	Pony car
Body style(s)	2-door coupe
Platform	Chrysler LC platform
Engine(s)	6.1 L (370 CID) HEMI V8 5.7 L (345 CID) HEMI V8 (2009 & later) 3.5 L (214 CID) V6 (2009 & later)
Transmission(s)	4-speed Automatic (2009 & later V6) 5-speed Automatic 6-speed Manual (2009 & later)
Wheelbase	116.0 in (2946 mm)
Length	197.7 in (5022 mm)
Width	75.7 in (1923 mm)
Height	57.0 in (1448 mm)
Related	Chrysler 300 Dodge Charger Dodge Magnum

http://en.wikipedia.org/w/index.php?title=Dodge_Challenger&action=submit

2008
On December 3, 2007, Chrysler started taking deposits for the third-generation Dodge Challenger, which debuted on February 6, 2008 simultaneously at the Chicago Auto Show^[8] and Philadelphia International Auto Show. Listing at US$40,095, the new version is a 2-door coupe which shares common design elements with the first generation Challenger, despite being significantly longer and taller. The chassis is a modified (shortened wheelbase) version of the LX platform that underpins the 2006-Current Dodge Charger, 2005-2008 Dodge Magnum, and the 2005-Current Chrysler 300. It is equipped with the SRT-8 6.1 L 345 CID Hemi and a 5-speed AutoStick automatic transmission, and outperforms the legendary 1970 Hemi Challenger.^{[citation needed]} The entire 2008 run of 6,400 cars were pre-sold (many of which for above MSRP), and production commenced on May 8, 2008. Chrysler of Mexico is offering only 100 of this car for that country with a 6.1 L engine and 425 HP, the version is SRT/8.

Chrysler has auctioned off two 2008 SRT-8 for charity. 2008 Challenger SRT-8 #1 has been auctioned off for $400,000.00 to benefit the notMYkid non-profit org, and a 'B5' Blue Challenger SRT-8 #43 with a winning bid of $228,143.43 with the proceeds going to Victory Junction Gang Camp.^[9]

At the 2008 New York Auto Show, Chrysler debuted the full Dodge Challenger line for 2009, with three different trims (SE, R/T, and SRT8) to choose from:

The base model Challenger is powered by a 3.5 L (214 CID)^[10] V6 producing 250 hp and 250 lb·ft which is coupled to a 4-speed automatic transmission.^[11] Several different exterior colors, and either cloth or leather interiors are available. Standard features include air conditioning; power windows, locks, and mirrors; cruise control; and 17-inch aluminum wheels. Leather upholstery, heated front seats, sunroof, 18-inch aluminum wheels, and a premium audio system are available as options, as are ABS, and stability and traction control.^[12]

R/T

The mid-level Challenger is powered by a 345-cubic-inch, 5.7 L HEMI V8 producing and coupled to either a 5-speed auto or 6-speed manual transmission. With the 6-speed manual, the Multi-Displacement System option is deleted, but the engine produces 375 hp and 404 lb·ft, whereas the 5.7&nbps;L (345 CID) V8 with automatic transmission makes only 370 hp and 398 lb·ft.^[11]

R/T Classic

The brochure of the 2009 Challenger shows a "classic" version of the Dodge Challenger R/T, with the 5.7 L 345 CID Hemi, and retro aspects such as script "Challenger" badges on the front panels and black "R/T" stripes. It will be produced in B5 Blue only, and will be late availability.

SRT-8

The '09 SRT-8 is virtually identical to its '08 counterpart, with the main difference being the choice of either a 5-speed automatic or a 6-speed manual transmission. Standard features include big Brembo brakes, a special suspension, bi-xenon headlamps, heated leather sport seats, keyless go, Sirius satellite radio, and 20-inch forged aluminum wheels in addition to most amenities offered on the lower R/T and SE grades like air con and cruise control.^[12] In addition, the 2009 will have a true "limited slip" differential.^[13]